Skip to content
Agcor Steel
Metal Roofing, Pole Barns, Wooden Trusses, Steel Trusses, Contractors
Home
POLE BARNS
METAL ROOFING
WOOD TRUSSES
STEEL TRUSSES
CUSTOMERS
Employment
Portal
GET QUOTE
Home
POLE BARNS
METAL ROOFING
WOOD TRUSSES
STEEL TRUSSES
CUSTOMERS
Employment
Portal
Conveyer Checklist Daily:(10 hours of operation)
First Name
Last Name
Date / Time
Daily
Check reservoir fluid level.
Check for fluid leaks.
Check all hoses and electrical cords for cracks, abrasions, twisting, etc. Small leaks at connections can be remedied by tightening connections or replacing faulty component.
Check that oil pressure does not exceed 3,000 PSI.
Check all pivot joints & roller bearings for noise and wear.
Check overall condition of unit(i.e. bends, breaks, loose or missing screws, etc.)
Comments/Notes
Submit Form
Conveyer Checklist Monthly(100 hours of operation)
First Name
Last Name
Date / Time
Monthly
Check quality of oil. Replace if discolored(oxidized), cloudy, or otherwise contaminated. Do not overfill reservoir. Always use clean fluid.
Inspect lift cylinder rods for scoring and leaking, wipe away any foreign material.
Inspect all structural and mechanical components for cracked, or broken welds and any distortion caused by collision, overloading, or other misuse.
Inspect snap rings/bolts at rollers & pivot points for proper retention & tightness.
Inspect cylinder trunion pin for proper retention.
When all checks have been completed, start unit and operate through all functions. Inspect all components for signs of noise, vibration, erratic movement, and any other abnormal behavior.
Comments/Notes
Submit Form
Conveyer Checklist Yearly(1,000 hours of operation)
First Name
Last Name
Date / Time
Yearly
Change oil and clean reservoir. Always use clean fluid. Never return fluid from drip pans, pit, etc. back to reservoir. Dispose of and handle used fluid as a hazardous material.
If noise or vibration has been noticed, remove lift cylinder pins, pivot pins, and roller bearings. Inspect for wear and replace as necessary.
Inspect all hydraulic hoses, replace any that show signs of wear or leaking.
Replace all filters.
Check for permanent mechanical deformation.
Comments/Notes
Submit Form